Related
Coming from Wolfram Mathematica, I like the idea that whenever I pass a variable to a function I am effectively creating a copy of that variable. On the other hand, I am learning that in Julia there are the notions of mutable and immutable types, with the former passed by reference and the latter passed by value. Can somebody explain me the advantage of such a distinction? why arrays are passed by reference? Naively I see this as a bad aspect, since it creates side effects and ruins the possibility to write purely functional code. Where I am wrong in my reasoning? is there a way to make immutable an array, such that when it is passed to a function it is effectively passed by value?
here an example of code
#x is an in INT and so is immutable: it is passed by value
x = 10
function change_value(x)
x = 17
end
change_value(x)
println(x)
#arrays are mutable: they are passed by reference
arr = [1, 2, 3]
function change_array!(A)
A[1] = 20
end
change_array!(arr)
println(arr)
which indeed modifies the array arr
There is a fair bit to respond to here.
First, Julia does not pass-by-reference or pass-by-value. Rather it employs a paradigm known as pass-by-sharing. Quoting the docs:
Function arguments themselves act as new variable bindings (new
locations that can refer to values), but the values they refer to are
identical to the passed values.
Second, you appear to be asking why Julia does not copy arrays when passing them into functions. This is a simple one to answer: Performance. Julia is a performance oriented language. Making a copy every time you pass an array into a function is bad for performance. Every copy operation takes time.
This has some interesting side-effects. For example, you'll notice that a lot of the mature Julia packages (as well as the Base code) consists of many short functions. This code structure is a direct consequence of near-zero overhead to function calls. Languages like Mathematica and MatLab on the other hand tend towards long functions. I have no desire to start a flame war here, so I'll merely state that personally I prefer the Julia style of many short functions.
Third, you are wondering about the potential negative implications of pass-by-sharing. In theory you are correct that this can result in problems when users are unsure whether a function will modify its inputs. There were long discussions about this in the early days of the language, and based on your question, you appear to have worked out that the convention is that functions that modify their arguments have a trailing ! in the function name. Interestingly, this standard is not compulsory so yes, it is in theory possible to end up with a wild-west type scenario where users live in a constant state of uncertainty. In practice this has never been a problem (to my knowledge). The convention of using ! is enforced in Base Julia, and in fact I have never encountered a package that does not adhere to this convention. In summary, yes, it is possible to run into issues when pass-by-sharing, but in practice it has never been a problem, and the performance benefits far outweigh the cost.
Fourth (and finally), you ask whether there is a way to make an array immutable. First things first, I would strongly recommend against hacks to attempt to make native arrays immutable. For example, you could attempt to disable the setindex! function for arrays... but please don't do this. It will break so many things.
As was mentioned in the comments on the question, you could use StaticArrays. However, as Simeon notes in the comments on this answer, there are performance penalties for using static arrays for really big datasets. More than 100 elements and you can run into compilation issues. The main benefit of static arrays really is the optimizations that can be implemented for smaller static arrays.
Another package-based options suggested by phipsgabler in the comments below is FunctionalCollections. This appears to do what you want, although it looks to be only sporadically maintained. Of course, that isn't always a bad thing.
A simpler approach is just to copy arrays in your own code whenever you want to implement pass-by-value. For example:
f!(copy(x))
Just be sure you understand the difference between copy and deepcopy, and when you may need to use the latter. If you're only working with arrays of numbers, you'll never need the latter, and in fact using it will probably drastically slow down your code.
If you wanted to do a bit of work then you could also build your own array type in the spirit of static arrays, but without all the bells and whistles that static arrays entails. For example:
struct MyImmutableArray{T,N}
x::Array{T,N}
end
Base.getindex(y::MyImmutableArray, inds...) = getindex(y.x, inds...)
and similarly you could add any other functions you wanted to this type, while excluding functions like setindex!.
Each Erlang process maintains its own private address space. All communication happens via copying without sharing (except big binaries). If each process is processing one message at a time with no concurrent access over its objects, I don't see why do we need immutable/persistent data structures.
Erlang was initially implemented in Prolog, which doesn't really use mutable data structures either (though some dialects do). So it started off without them. This makes runtime implementation simpler and faster (garbage collection in particular).
So adding mutable data structures would require a lot of effort, could introduce bugs, and Erlang programmers are nearly by definition at least willing to live without them.
Many actually consider their absence to be a positive good: less concern about object identity, no need for defensive copying because you don't know whether some other piece of code is going to modify the data you passed (or might be changed later to modify it), etc.
This absence does mean that Erlang is pretty unusable in some domains (e.g. high performance scientific computing), at least as the main language. But again, this means that nobody in these domains is going to use Erlang in the first place and so there's no particular incentive to make it usable at the cost of making existing users unhappy.
I remember seeing a mailing list post by Joe Armstrong quite a long time ago (which I couldn't find with a quick search now) saying that he initially planned to add mutable variables when he'd need them... except he never quite did, and performance was good enough for everything he was using Erlang for.
It is indeed the case that in Erlang immutability does not solve any "shared state" problems, as immutable data are "process local".
From the functional programming language perspective, however, immutability offers a number of benefits, summarized adequately in this Quora answer:
The simplest definition of functional programming is that it’s a programming
paradigm where you are transforming immutable data with functions.
The definition uses functions in the mathematical sense, where it’s
something that takes an input, and produces an output.
OO + mutability tends to violate that definition because when you want
to change a piece of data it generally will not return the output, it
will likely return void or unit, and that when you call a method on
the object the object itself isn’t input for the function.
As far as what advantages the paradigm has, composability, thread
safety, being able to track what went wrong where better, the ability
to sort of separate the data from the actual computation on it being
done, etc.
how would this work?
factorial(1) -> 1;
factorial(X) ->
X*factorial(X-1).
if you run factorial(4), a single process will be running the same function. Each time the function will have it's own value of X, if the value of X was in the scope of the process and not the function recursive functions wouldn't work. So first we need to understand scope. If you want to say that you don't see why data needs to be immutable within the scope of a single function/block you would have a point, but it would be a headache to think about where data is immutable and where it isn't.
I'm currently trying to master Erlang. It's the first functional programming language that I look into and I noticed that in Erlang, each assignments that you do is a single assignment. And apparently, not just in Erlang, but in many other functional programming languages, assignments are done through single assignment.
I'm really confused about why they made it like that. What exactly is the purpose of single assignment? What benefits can we get from it?
Immutability (what you call single assignment), simplifies a lot of things because it takes out the "time" variable from your programs.
For example, in mathematics if you say
x = y
You can replace x for y, everywhere. In operational programming languages you can't ensure that this equality holds: there is a "time" (state) associated with each line of code. This time state also leaves the door open to undesired side effects which is the enemy number one of modularity and concurrency.
For more information see this.
Because of Single Assignment, Side effects are so minimal. Infact, its so hard to write code with race conditions or any side effects in Erlang. This is because, the Compiler easilly tells un-used variables, created terms which are not used, shadowed variables (especially inside funs ) e.t.c. Another advantage that Erlang gained in this is Referential Transparency. A function in Erlang will depend only on the variables passed to it and NOT on global variables, except MACROS (and macros cannot be changed at run-time, they are constants.). Lastly, if you watched the Erlang Movie, the Sophisticated Error Detection Mechanism which was built into Erlang depends so much on the fact that in Erlang, variables are assigned Once.
Having variables keep their values makes it much easier to understand and debug the code. With concurrent processes you get the same kind of problem anyway, so there is enough complication anyway without having just any variable potentially change its value at any time. Think of it as encapsulating side effects by only allowing them when explicit.
What should be the measures that should be used to identify that code is over abstracted and very hard to understand and what should be done to reduce over abstraction?
"Simplicity over complexity, complexity over complicatedness"
So - there's a benefit to abstract something only if You are "de-leveling" complicatedness to complexity. Reasons to do that can vary: better modularity, better encapsulation etc.
Identifying over abstraction is a chicken and egg problem. In order to reduce over abstraction You need to understand actual reason behind code lines. That includes understanding idea of particular abstraction itself (in contrast to calling it over abstracted cause of lack of understanding). And that's not enough - You need to know a better, simpler solution to prove that it's over abstracted.
If You are looking for tool that could do it in Your place - look no more, only mind can reliably judge that.
I will give an answer that will get a LOT of down votes!
If the code is written in an OO language .. it is necessarily heavily over-abstracted. The purer the language the worse the problem.
Abstraction should be used with great caution. If in doubt always use concrete data structures. (You can always abstract later, this is easier than de-abstraction :)
You must be very certain you have the right abstraction in your current context, and you must be very sure that concept will stand the test of change. Abstraction has a high price in performance of both the code and the coder.
Some weak tests for over-abstraction: if the data structure is a product type (struct in C) and the programmer has written get and set method for each field, they have utterly failed to provide any real abstraction, disabled operators like C increment, for no purpose, and simply not understood that the struct field names are already the abstract representation of a product. Duplicating and laming up the interface is not a good idea.
A good test for the product case is whether there exist any data invariants to maintain. For example a pair of integers representing a rational number is almost sufficient, there's little need for any abstraction because all pairs are valid except when the denominator is zero. However for performance reasons one may choose to maintain an invariant, typically the denominator is required to be greater than zero, and the numerator and denominator are relatively prime. To ensure the invariant, the product representation is encapsulated: the initial value protected by a constructor and methods constrained to maintain the invariant.
To fix code I recommend these steps:
Document the representation invariants the abstraction is maintaining
Remove the abstraction (methods) if you can't find strong invariants
Rewrite code using the method to access the data directly.
This procedure only works for low level abstraction, i.e. abstraction of small values by classes.
Over abstraction at a higher level is much harder to deal with. Ideally you'd refactor the code repeatedly, checking to see after each step it continues to work. However this will be hard, and sometimes a major rewrite is required, rather than a refinement. It's probably not worth it unless the abstraction is so far off base it is not tenable to continue to maintain it.
Download Magento and have a look at the code, read some documents on it and have a look at their ERD: http://www.magentocommerce.com/wiki/_media/doc/magento---sample_database_diagram.png?cache=cache
I'm not joking, this is over-abstraction.. trying to please everyone and cover every base is a terrible idea and makes life extremely difficult for everyone.
Personally I would say that "What is the ideal level of abstraction?" is a subjective question.
I don't like code that uses a new line for every atomic operation, but I also don't like 10 nested operations within one line.
I like the use of recursive functions, but I don't appreciate recursion for the sole sake of recursion.
I like generics, but I don't like (nested) generic functions that e.g. use different code for each specific type that's expected...
It is a matter of personal opinion as well as common sense. Does this answer your question?
I completely agree with what #ArnisLapsa wrote:
"Simplicity over complexity, complexity over complicatedness"
And that
an abstraction is used to "de-level" those, from complicated to complex
(and from complex to simpler)
Also, as stated by #MartinHemmings a good abstraction is quite subjective because we don't all think the same way. And actually our way of thinking change with time. So Something that someone find simple might looks complex to others, and even become simpler with more experiences. Eg. A monadic operation is something trivial for functional programmer, but can be seriously confusing for others. Similarly, a design with mutable object communicating with each other can be natural for some and feel un-trackable for others.
That being said, I would like to add a couple of indicators. Note that this applies to abstractions used in code-base, not "paradigm abstraction" such as everything-is-a-function, or everything-is-designed-as-objects. So:
To the people it concerns, the abstraction should be conceptually simpler than other alternatives, without looking at the implementation. If you find that thinking of all possible cases is simpler that reasoning using the abstraction, then this abstraction is not suitable (for you)
Its implementation should reason only about the abstraction, not the specific cases that it will be used for. As soon as the abstraction implementation has parts made for specific cases, it indicates an "unfit" abstraction. And increasing generalization to cope with each new case, is going the wrong way (and tends to fall to the next issue).
A very common indicator of over-abstraction I have found (and actually fell for) are abstractions that represent more than what is needed, now. As much as possible, they should allow to do exactly what is required, but nothing more. For example, say you're thinking of, or already have, a "2d point" abstraction for which you can define many operators you need. Then you have another need that could really be a "4d point" similar to the 2d. Don't start to use a "Ndimensionnal point" abstraction, especially thinking that you might later need it. Maybe you'll never have anything else than 2 and 4d (because it stays as "a good idea" in the backlog forever) but instead some requirements pops to convert 4d points into pairs of 2d points. That's going to be hard to generalize to n-dimensions. So, each abstraction can be checked to cover and only cover the actual needs. In my point example, the complexity "n-dimensional" is actually only used to cope with the 2 and 4d cases (and the 4d might not even be used that much).
Finally, in a more global point of view, a code-base that has many not related abstractions, is an indicator that the dev team tends to abstract every little issues. So probably many of them are or became over-abstracted.
I've recently been learning about functional programming (specifically Haskell, but I've gone through tutorials on Lisp and Erlang as well). While I found the concepts very enlightening, I still don't see the practical side of the "no side effects" concept. What are the practical advantages of it? I'm trying to think in the functional mindset, but there are some situations that just seem overly complex without the ability to save state in an easy way (I don't consider Haskell's monads 'easy').
Is it worth continuing to learn Haskell (or another purely functional language) in-depth? Is functional or stateless programming actually more productive than procedural? Is it likely that I will continue to use Haskell or another functional language later, or should I learn it only for the understanding?
I care less about performance than productivity. So I'm mainly asking if I will be more productive in a functional language than a procedural/object-oriented/whatever.
Read Functional Programming in a Nutshell.
There are lots of advantages to stateless programming, not least of which is dramatically multithreaded and concurrent code. To put it bluntly, mutable state is enemy of multithreaded code. If values are immutable by default, programmers don't need to worry about one thread mutating the value of shared state between two threads, so it eliminates a whole class of multithreading bugs related to race conditions. Since there are no race conditions, there's no reason to use locks either, so immutability eliminates another whole class of bugs related to deadlocks as well.
That's the big reason why functional programming matters, and probably the best one for jumping on the functional programming train. There are also lots of other benefits, including simplified debugging (i.e. functions are pure and do not mutate state in other parts of an application), more terse and expressive code, less boilerplate code compared to languages which are heavily dependent on design patterns, and the compiler can more aggressively optimize your code.
The more pieces of your program are stateless, the more ways there are to put pieces together without having anything break. The power of the stateless paradigm lies not in statelessness (or purity) per se, but the ability it gives you to write powerful, reusable functions and combine them.
You can find a good tutorial with lots of examples in John Hughes's paper Why Functional Programming Matters (PDF).
You will be gobs more productive, especially if you pick a functional language that also has algebraic data types and pattern matching (Caml, SML, Haskell).
Many of the other answers have focused on the performance (parallelism) side of functional programming, which I believe is very important. However, you did specifically ask about productivity, as in, can you program the same thing faster in a functional paradigm than in an imperative paradigm.
I actually find (from personal experience) that programming in F# matches the way I think better, and so it's easier. I think that's the biggest difference. I've programmed in both F# and C#, and there's a lot less "fighting the language" in F#, which I love. You don't have to think about the details in F#. Here's a few examples of what I've found I really enjoy.
For example, even though F# is statically typed (all types are resolved at compile time), the type inference figures out what types you have, so you don't have to say it. And if it can't figure it out, it automatically makes your function/class/whatever generic. So you never have to write any generic whatever, it's all automatic. I find that means I'm spending more time thinking about the problem and less how to implement it. In fact, whenever I come back to C#, I find I really miss this type inference, you never realise how distracting it is until you don't need to do it anymore.
Also in F#, instead of writing loops, you call functions. It's a subtle change, but significant, because you don't have to think about the loop construct anymore. For example, here's a piece of code which would go through and match something (I can't remember what, it's from a project Euler puzzle):
let matchingFactors =
factors
|> Seq.filter (fun x -> largestPalindrome % x = 0)
|> Seq.map (fun x -> (x, largestPalindrome / x))
I realise that doing a filter then a map (that's a conversion of each element) in C# would be quite simple, but you have to think at a lower level. Particularly, you'd have to write the loop itself, and have your own explicit if statement, and those kinds of things. Since learning F#, I've realised I've found it easier to code in the functional way, where if you want to filter, you write "filter", and if you want to map, you write "map", instead of implementing each of the details.
I also love the |> operator, which I think separates F# from ocaml, and possibly other functional languages. It's the pipe operator, it lets you "pipe" the output of one expression into the input of another expression. It makes the code follow how I think more. Like in the code snippet above, that's saying, "take the factors sequence, filter it, then map it." It's a very high level of thinking, which you don't get in an imperative programming language because you're so busy writing the loop and if statements. It's the one thing I miss the most whenever I go into another language.
So just in general, even though I can program in both C# and F#, I find it easier to use F# because you can think at a higher level. I would argue that because the smaller details are removed from functional programming (in F# at least), that I am more productive.
Edit: I saw in one of the comments that you asked for an example of "state" in a functional programming language. F# can be written imperatively, so here's a direct example of how you can have mutable state in F#:
let mutable x = 5
for i in 1..10 do
x <- x + i
Consider all the difficult bugs you've spent a long time debugging.
Now, how many of those bugs were due to "unintended interactions" between two separate components of a program? (Nearly all threading bugs have this form: races involving writing shared data, deadlocks, ... Additionally, it is common to find libraries that have some unexpected effect on global state, or read/write the registry/environment, etc.) I would posit that at least 1 in 3 'hard bugs' fall into this category.
Now if you switch to stateless/immutable/pure programming, all those bugs go away. You are presented with some new challenges instead (e.g. when you do want different modules to interact with the environment), but in a language like Haskell, those interactions get explicitly reified into the type system, which means you can just look at the type of a function and reason about the type of interactions it can have with the rest of the program.
That's the big win from 'immutability' IMO. In an ideal world, we'd all design terrific APIs and even when things were mutable, effects would be local and well-documented and 'unexpected' interactions would be kept to a minimum. In the real world, there are lots of APIs that interact with global state in myriad ways, and these are the source of the most pernicious bugs. Aspiring to statelessness is aspiring to be rid of unintended/implicit/behind-the-scenes interactions among components.
One advantage of stateless functions is that they permit precalculation or caching of the function's return values. Even some C compilers allow you to explicitly mark functions as stateless to improve their optimisability. As many others have noted, stateless functions are much easier to parallelise.
But efficiency is not the only concern. A pure function is easier to test and debug since anything that affects it is explicitly stated. And when programming in a functional language, one gets in the habit of making as few functions "dirty" (with I/O, etc.) as possible. Separating out the stateful stuff this way is a good way to design programs, even in not-so-functional languages.
Functional languages can take a while to "get", and it's difficult to explain to someone who hasn't gone through that process. But most people who persist long enough finally realise that the fuss is worth it, even if they don't end up using functional languages much.
Without state, it is very easy to automatically parallelize your code (as CPUs are made with more and more cores this is very important).
Stateless web applications are essential when you start having higher traffic.
There could be plenty of user data that you don't want to store on the client side for security reasons for example. In this case you need to store it server-side. You could use the web applications default session but if you have more than one instance of the application you will need to make sure that each user is always directed to the same instance.
Load balancers often have the ability to have 'sticky sessions' where the load balancer some how knows which server to send the users request to. This is not ideal though, for example it means every time you restart your web application, all connected users will lose their session.
A better approach is to store the session behind the web servers in some sort of data store, these days there are loads of great nosql products available for this (redis, mongo, elasticsearch, memcached). This way the web servers are stateless but you still have state server-side and the availability of this state can be managed by choosing the right datastore setup. These data stores usually have great redundancy so it should almost always be possible to make changes to your web application and even the data store without impacting the users.
My understanding is that FP also has a huge impact on testing. Not having a mutable state will often force you to supply more data to a function than you would have to for a class. There's tradeoffs, but think about how easy it would be to test a function that is "incrementNumberByN" rather than a "Counter" class.
Object
describe("counter", () => {
it("should increment the count by one when 'increment' invoked without
argument", () => {
const counter = new Counter(0)
counter.increment()
expect(counter.count).toBe(1)
})
it("should increment the count by n when 'increment' invoked with
argument", () => {
const counter = new Counter(0)
counter.increment(2)
expect(counter.count).toBe(2)
})
})
functional
describe("incrementNumberBy(startingNumber, increment)", () => {
it("should increment by 1 if n not supplied"){
expect(incrementNumberBy(0)).toBe(1)
}
it("should increment by 1 if n = 1 supplied"){
expect(countBy(0, 1)).toBe(1)
}
})
Since the function has no state and the data going in is more explicit, there are fewer things to focus on when you are trying to figure out why a test might be failing. On the tests for the counter we had to do
const counter = new Counter(0)
counter.increment()
expect(counter.count).toBe(1)
Both of the first two lines contribute to the value of counter.count. In a simple example like this 1 vs 2 lines of potentially problematic code isn't a big deal, but when you deal with a more complex object you might be adding a ton of complexity to your testing as well.
In contrast, when you write a project in a functional language, it nudges you towards keeping fancy algorithms dependent on the data flowing in and out of a particular function, rather than being dependent on the state of your system.
Another way of looking at it would be illustrating the mindset for testing a system in each paradigm.
For Functional Programming: Make sure function A works for given inputs, you make sure function B works with given inputs, make sure C works with given inputs.
For OOP: Make sure Object A's method works given an input argument of X after doing Y and Z to the state of the object. Make sure Object B's method works given an input argument of X after doing W and Y to the state of the object.
The advantages of stateless programming coincide with those goto-free programming, only more so.
Though many descriptions of functional programming emphasize the lack of mutation, the lack of mutation also goes hand in hand with the lack of unconditional control transfers, such as loops. In functional programming languages, recursion, in particularly tail recursion, replaces looping. Recursion eliminates both the unconditional control construct and the mutation of variables in the same stroke. The recursive call binds argument values to parameters, rather than assigning values.
To understand why this is advantageous, rather than turning to functional programming literature, we can consult the 1968 paper by Dijkstra, "Go To Statement Considered Harmful":
"The unbridled use of the go to statement has an immediate consequence that it becomes terribly hard to find a meaningful set of coordinates in which to describe the process progress."
Dijkstra's observations, however still apply to structured programs which avoid go to, because statements like while, if and whatnot are just window dressing on go to! Without using go to, we can still find it impossible to find the coordinates in which to describe the process progress. Dijkstra neglected to observe that bridled go to still has all the same issues.
What this means is that at any given point in the execution of the program, it is not clear how we got there. When we run into a bug, we have to use backwards reasoning: how did we end up in this state? How did we branch into this point of the code? Often it is hard to follow: the trail goes back a few steps and then runs cold due to a vastness of possibilities.
Functional programming gives us the absolute coordinates. We can rely on analytical tools like mathematical induction to understand how the program arrived into a certain situation.
For example, to convince ourselves that a recursive function is correct, we can just verify its base cases, and then understand and check its inductive hypothesis.
If the logic is written as a loop with mutating variables, we need a more complicated set of tools: breaking down the logic into steps with pre- and post-conditions, which we rewrite in terms mathematics that refers to the prior and current values of variables and such. Yes, if the program uses only certain control structures, avoiding go to, then the analysis is somewhat easier. The tools are tailored to the structures: we have a recipe for how we analyze the correctness of an if, while, and other structures.
However, by contrast, in a functional program there is no prior value of any variable to reason about; that whole class of problem has gone away.
Haskel and Prolog are good examples of languages which may be implemented as stateless programming languages. But unfortunately they are not so far. Both Prolog and Haskel have imperative implementations currently. See some SMT's, seem closer to stateless coding.
This is why you are having hard time seeing any benefits from these programing languages. Due to imperative implementations we have no performance and stability benefits. So the lack of stateless languages infrastructure is the main reason you feel no any stateless programming language due to its absence.
These are some benefits of pure stateless:
Task description is the program (compact code)
Stability due to absense of state-dependant bugs (the most of bugs)
Cachable results (a set of inputs always cause same set of outputs)
Distributable computations
Rebaseable to quantum computations
Thin code for multiple overlapping clauses
Allows differentiable programming optimizations
Consistently applying code changes (adding logic breaks nothing written)
Optimized combinatorics (no need to bruteforce enumerations)
Stateless coding is about concentrating on relations between data which then used for computing by deducing it. Basically this is the next level of programming abstraction. It is much closer to native language then any imperative programming languages because it allow describing relations instead of state change sequences.